Petersen Stainless Rigging Limited, Cowen Road, Blaydon-on-Tyne, Tyne & Wear, NE21 5TW, UK
Email: lifting@petersen-stainless.co.uk   Tel: +44 (0)191 4140156   Fax: +44 (0)191 4990041

Our range of CE marked and certified stainless steel lifting shackles and gear has been designed specifically for application in consultation with our customers, helping them to solve problems and provide the right parts for their applications.  As well as the products shown below we manufacture super duplex shackles from 32760 grade super duplex for sub-sea and highly corrosive environments.  Super duplex is the ultimate material for a sea bed shackle.  Our super duplex shackles typically find application on ROVs, Sonar Arrays, Sonar Buoys and Sonar Guns and other seabed and seismic exploration equipment.

We also manufacture a wide range of NSN Shackles and NEN Shackles including low-mag shackles (low magnetic permeability) uG < 1.05.  These NATO pattern shackles are used extensively in military applications.

All stainless steel shackles are manufactured in the UK under a Lloyds certified ISO9001:2008 and AS9100 rev C quality management system.

3rd party Lloyds and DNV certification can be arranged on request.

High Tensile Stainless Steel D Shackles

Product Features

  • Stainless steel dee shackles manufactured from 17/4PH precipitation hardening martensitic stainless steel
  • Excellent for general lifting applications - high tensile properties while avoiding work hardening
  • Corrosion resistance similar to 18/8 grade steels (304)
  • Factor of Safety 6:1
  • Available with 4 pin types - Standard Screw Collar Pin (A Type), Extended Screw Collar Pin (AL Type), Countersunk Head (B Type), E Type Safety Pin (E Type)
  • Manufactured using the latest technology in electrical upset forging

Quality Features

  • Every shackle is manufactured, proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All shackles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

Dee Shackle with A-Type PinDee Shackle with B-Type PinD Shackle with E-Type PinHigh Corrosion Resistance Stainless Steel D Shackle with Safety Pin

High Tensile Stainless Steel Bow Shackles

Product Features

  • Stainless steel bow shackles manufactured from 17/4PH precipitation hardening martensitic stainless steel
  • Excellent for general lifting applications - high tensile properties while avoiding work hardening
  • Corrosion resistance similar to 18/8 grade steels
  • Factor of Safety 6:1
  • Available with 4 pin types - Standard Screw Collar Pin (A Type), Extended Screw Collar Pin (AL Type), Countersunk Head (B Type), E Type Safety Pin (E Type)
  • Manufactured using the latest technology in electrical upset forging

Quality Features

  • Every shackle is manufactured, proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All shackles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

High Tensile Stainless Steel Bow Shackle with A pinHigh Tensile Stainless Steel Bow Shackle with AL pinHigh Tensile Stainless Steel Bow Shackle with B pin

High Tensile Stainless Steel Bow Shackle with E pin

High Corrosion Resistant D Shackles with Safety Pin

Product Features

  • Stainless Steel e-pin dee Shackles EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • Available with 2 pin types - E Type Safety Pin with Standard Nut (E Type) or Nylok Nut (E Type-NY)
  • Special design of bolt ensures the nuts is positioned correctly allowing sufficient room for the cotter pin

Quality Features

  • Every shackle is manufactured, proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All shackles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish
  • Manufactured using the latest technology in electrical upset forging

Typical Applications

  • Water utility installations & other corrosive facilities
  • Pump chains and pump lifting
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

High Corrosion Resistance Stainless Steel D Shackle with Safety Pin

High Corrosion Resistant Bow Shackles with Safety Pin

Product Features

  • Stainless steel e-pin bow shackles manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • Available with 2 pin types - E Type Safety Pin with Standard Nut (E Type) or Nylok Nut (E Type-NY)
  • Special design of bolt ensures the nuts is positioned correctly allowing sufficient room for the cotter pin

Quality Features

  • Every shackle is proof tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All shackles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish
  • Manufactured using the latest technology in electrical upset forging

Typical Applications

  • Water utility installations & other corrosive facilities
  • Pump chains and pump lifting
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Single Point Mooring, Fixed Point Supply Operation, Single Buoy Mooring, FPSO shackle, SPM shackle, SBM shackle, sonardyne duplex shackle, sonardyne super duplex shackle, sonardyne stainless steel shackle, 4030-99-149-6655 0579-91-539-5777 4030-99-149-6657 0579-91-539-5778 4030-99-129-5604 0579-91-539-5779 4030-99-149-6509 4030-99-149-6679 0579-91-539-5780 4030-99-137-9819 4030-99-149-6500 4030-99-151-1952 0579-91-539-1065 4030-99-149-6499 0579-91-539-4700 4030-99-149-6785 057-99-539-5776 4030-99-149-6619 057-91-539-5775 4030-99-149-6637 057-91-537-1061 4030-99-151-1962

Click an image to enlarge it

High Tensile Stainless Steel Bow Shackle

Chain Link D Shackles

Product Features

  • Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • Unique design enabling the shackle to be made captive to a chain sling without the need for welding.
  • The special Brace pin allows the shackle to be permanently attached to the chain on-site. This results in the shackle becoming part of the chain assembly.
  • The extended load pin is fitted with a split pin to ensure that the load pin remains in position even under vibration.
  • All shackles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

  • Every shackle is proof tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All shackles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish
  • Manufactured using the latest technology in electrical upset forging

Typical Applications

  • Water utility installations & other corrosive facilities
  • Pump chains and pump lifting

Click an image to enlarge it

Chain Link D ShackleChain Link D Shackle Close UpChain Link D Close Up

Corrosion Resistant Turnbuckles/Bottle Screws Eye-Eye

Product Features

  • Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • All turnbuckles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

  • Every turnbuckle is proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All turnbuckles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • Water utility installations & other corrosive facilities
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

Eye-eye TurnbuckleEye-eye Turnbuckle

Corrosion Resistant Turnbuckles/Bottle Screws Jaw-Eye

Product Features

  • Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • All turnbuckles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

  • Every turnbuckle is proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All turnbuckles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • Water utility installations & other corrosive facilities
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

Jaw-Eye Turnbuckle

Jaw-eye Turnbuckle

 

 

Corrosion Resistant Turnbuckles/Bottle Screws Jaw-Jaw

Product Features

  • Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • All turnbuckles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

  • Every turnbuckle is proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All turnbuckles are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • Water utility installations & other corrosive facilities
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes

Click an image to enlarge it

Eye-eye turnbuckleJaw-jaw Turnbuckle

Stainless Steel Wire Rope

Product Features

  • Sold as bespoke lengths to suit application or in 250m, 500m, and 1000m reels
  • Varying constructions and wire sizes
  • Austenitic condition to give maximum corrosion resistance
  • Dimensions and tensile grades conforming to BS MA 29
  • Wire rope slings available, cut and manufactured to custom lengths

Quality Features

  • High quality finish and excellent polish

Typical Applications

  • Leisure Marine Industry
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes – Wire Rope Slings

Click an image to enlarge it

Standard Strand 1 x 19Standard Strand 1 X 37Standard Strand 7 x 7Standard Strand 7 x 19Compact Strand 1 x 17Compact Strand 1 x 19Compact Strand 1 x 31Compact Strand 1 x 36IWRC 6 x 36WSIWRC 18 x 7Steel Wire RopeSteel Wire RopeSteel Wire RopeSteel Wire Rope

 

Stainless Steel Wire Rope Clips (Bulldog Clips)

Product Features

  • Manufactured in accordance with American Federal Specification & DIN 741
  • Free from sharp edges - good smooth finish all round
  • High corrosion resistance

Quality Features

  • High quality finish and excellent polish

Typical Applications

  • Wire Rope Slings
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting purposes

Click an image to enlarge it

Wire Rope ClipWire Rope Clip

Stainless Steel Thimbles

Product Features

  • Free from sharp edges - good smooth finish all round
  • High corrosion resistance

Quality Features

  • High quality finish and excellent polish

Typical Applications

  • Wire Rope Slings
  • Chemical installations - Chlorine plants etc.
  • General lifting in off-shore applications
  • General lifting purposes

Click an image to enlarge it

Stainless Steel ThimbleStainless Steel Thimble

Polyester Lifting Slings – Round and Flat Webbing Slings

Product Features

  • Individual certificates provided with each sling
  • Flat Webbing slings have protected eye sections
  • The load-bearing high polyester yarn is well protected in its webbing cover and does not come into direct contact with any external elements
  • Round slings are manufactured on state of the art Round Sling Winding Machine
  • Colour Coded for WLL use

Quality Features

  • Round Slings manufactured in accordance to EN 1492-2
  • Flat Webbing Slings manufactured in accordance with EN 1492-1
  • All Slings have a factor of safety 7:1
  • Individual certificates provided with each sling

Typical Applications

  • General lifting in off-shore applications
  • General lifting and tethering in leisure marine applications
  • General lifting purposes
  • Lashing and Tie Downs
  • Complex Lifting Applications

Click an image to enlarge it

Flat Webbing SlingsRound Slings

Industrial Lifting Blocks – Tufnol & Stainless Steel

Product Features

  • Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)
  • Excellent for lifting applications where a high level of corrosion resistance is required.
  • Factor of Safety 6:1
  • All sizes are of a bolted construction and can simply be dismantled for replacement of sheaves or other damaged parts
  • All shackles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

  • Every block is proof tested to 2 x WLL and certified at our manufacturing facility in the North East of England
  • All blocks are manufactured in accordance with the Machine Directive 2006/42/EC
  • Inspection certificate BS EN 10204 3.1b available on request.
  • High quality finish and excellent polish

Typical Applications

  • High Towers and lines where weight carried is of prime importance
  • Double blocks are used in pairs by electricity boards for live line working
  • General lifting in off-shore applications
  • General lifting purposes

Click an image to enlarge it

Double Eye Lifting BlockSingle Eye Lifting Block

Single Eye Lifting BlockLifting Block Fitting DetailLifting Block Sheaves

 
Petersen Stainless Rigging Limited, Cowen Road, Blaydon-on-Tyne, Tyne & Wear, NE21 5TW, UK
Tel: +44 (0)191 4140156   Fax: +44 (0)191 4990041